Telecommunications Parts
Base station enclosures, antenna mounts, waveguide brackets and RFI shielding cans — weather-sealed aluminium housings with salt-spray validated finishes.
Three Things That Decide Whether This Part Works
We do not claim to be the cheapest metal shop in Asia. We are the one that lets you stop managing your supply chain.
Sealing That Survives the Site
Enclosures that will be outdoors for years need consistent gasket compression and validated surface finish. We build and test assemblies rather than just bending sheet.
RFI Integrity
Shielding depends on seam geometry and conductivity, not on the material alone. We design the can to keep the seam in contact.
Bracket Strength for Antenna Loads
Antenna mounts see wind load and vibration. Rib placement and gauge selection matter more than the static weight suggests.
From Prototyping to Production
The same five stages whether you order one sample or 500,000 pieces.
Prototyping
Get parts for early-stage development. We use low-cost materials and processes to make samples that behave like the final product, so your design iterations are cheap and fast.
- Rapid material and design iterations
- Detailed prototypes for complex geometry
- Models that resemble final parts
Engineering Validation
Functional prototypes that let you identify every design risk before you commit to tooling. Where needed this takes several iterations to hit the required performance metrics.
- Precision parts manufacturing
- Reliable design and engineering support
- Optimised material properties
Design Validation
Validate function, performance and appearance. This is where material and finishing choices get decided — the point where a part starts looking and feeling right.
- Parts for market and field testing
- Performance and appearance validation
- Durable, repeatable finishes
Production Validation
Prepare for full-scale production with production-grade tooling and quality control. Verify the process before you order volume.
- Low-volume production tooling
- Verification of manufacturing processes
- Functionality of production-ready parts
Volume Production
Move to end-use parts at volume. Our in-house tooling, SPC and inspection keep yield and quality high while lead times and unit costs fall.
- Tight tolerances on precision parts
- Secondary operations for surface finish
- Rigorous inspection and QC
Four In-House Processes, One Purchase Order
Every process below happens under the same roof, on the same inspection record.
Sheet Metal Fabrication
Laser and plasma cutting, CNC bending, welding and assembly for enclosures, brackets and chassis.
View productsPrecision Stamping
Single, progressive and compound dies holding ±0.05mm on flat and shallow parts at volume.
View productsDeep Drawing
Single and multi-step hollow parts up to 300mm, with wall thickness progression controlled.
View productsCNC Machining
3, 4 and 5-axis milling plus turning, reaching ±0.02mm where the geometry allows.
View productsSurface Treatment
Anodizing, powder coating, plating, passivation and 30+ finishing options done in-house.
View productsAssembly & Kitting
Mechanical, pneumatic and electrical sub-assembly, kitted and labelled to your BOM.
View productsWhat We Run This Job On
Grades chosen for this sector's environment. Tell us if yours is not here — we source to spec.
Materials
- •Aluminium 5052 / 6061
- •Stainless 304 / 316L
- •Galvanised steel
- •Copper C110 grounding
- •PA66-GF30 insulators
- •Silicone gaskets
Surface Finishes
- •Hard anodizing
- •Powder coating
- •Passivation
- •Chromate-free conversion coating
- •Bead blast
- •Conductive / EMI grounding treatments
Common Telecommunications Parts We Manufacture
If your part is not listed, send the drawing — custom work is the majority of what we do.
Questions We Get About Telecommunications
Can you achieve IP54 or better on assembled enclosures?
Yes — with the right gasket material, groove geometry and fastener torque. We can pressure-test samples before you commit to volume.
Do you supply grounding straps and hardware?
Yes. Straps, lugs and bonding hardware can be fitted in the assembly cell.
We Also Manufacture For
Send Your Telecommunications Drawing
STEP, DWG or a photo. An engineer reviews it and returns a firm price within two working hours — with a manufacturability note attached.