Automotive High Precision Stamping Parts Manufacturer_167

About This Part

The interesting part of a job like this is not the metal — it is holding the critical dimensions steady across the batch. That is where most of our effort goes. Material grade and thickness are taken from your drawing. We substitute only with your approval, and every change is written on the order so the change history is not lost.

Held to a tighter band than production parts, with a first-article report so you can see the actual numbers before the batch runs. Drawings are reviewed by the operator who will run the job, not passed down a queue, so the questions come back before the material is cut. Ask for a sample before the batch if the application is new to you. We would rather you checked it early than discovered a problem at assembly.

Specification

Ranges below are what we run regularly. Anything outside these figures is not a problem — send the drawing and we will quote it.

Materials

SPCC / SECC steel or 5052-H32 aluminium; custom alloys also quoted

Thickness / stock

1–3mm standard, subject to your drawing

Dimensional tolerance

±0.005mm achievable

Process

Precision machining

Surface finish

As drawn. Anodising, powder coat, plating and passivation quoted on request.

Tolerance on datums

Per drawing. Datum scheme reviewed before the first article.

Max blank size

3000 × 1500mm

Minimum wall

0.8mm on steel, 1.0mm on aluminium, less where the drawing allows

Inspection

First-article report on request; batch sampling to ISO 2859-1

Certification

IATF 16949, PPAP, RoHS

What You Get

• Held to a tighter band than production parts, with a first-article report so you can see the actual numbers before the batch runs.
• SPCC / SECC steel or 5052-H32 aluminium is the part this is made from, and the tolerance is held through the operation rather than inspected into it.
• Parts that arrive on a line without rework. We hold the full tolerance stack through forming and check the corners where cracking starts.
• Repeat orders draw against the same tooling and the same process sheet, so batch ten matches batch one.

Typical Applications

Related Stamping Parts

316L Stainless Steel Medical Stamping Corrosion Resistant & SterileValidated medical fabrication Automotive Electronic Stamping Parts SupplierAutomotive production parts Automotive Supplier OEM Stamping Parts & Metal FormingAutomotive production parts Cleanroom Medical Stamping FDA Registered & Full Material TraceabilityValidated medical fabrication